We are currently in the process of updating our downloadable files and accessibility. In the interim, please call us for any WinFrac Software needs you may have. Thank you for your patience. 

(817) 332-3400

Winfrac Files

The setup file for WinFrac 6 (32 meters and 16 sensor channels) can be downloaded free of charge from our website. It does not contain WF6.exe, but does have all the drivers and setup files you’ll need to install WinFrac 6.

The WinFrac 6.132R executable file, created on the 19th of May, 2010, can be downloaded by contacting us for downloading information. This is the .exe file ONLY: you will need to have a functioning install of WinFrac 6.x already on your system for this to run. You’ll need to copy this file to the WF6 directory.

The Winfrac 6.130 executable file, created on the 9th of July, 2009, can be downloaded here. This is the .exe file ONLY: you will need to have a functioning install of WinFrac 6.x already on your system for this to run. You’ll need to copy this file to the WF6 directory.

Important Note: If you are logging and WinFrac is _not_ creating a .dat file, instead it is _only_ creating a .csv file, and you want it to create a .dat file, then go to the WF6Config directory, open the flowback.ini file, and change “Flowback=true” to “Flowback=False”. The .csv file should contain all the same data that the .dat file contained, just saved in a slightly different format, so if you are passing it on to corporate or to the company man it should be ok. But if you are planning to use post plot then you’ll need a .dat file. When flowback is set to false a .dat file & a .csv are created so that if corporate or the company man wants a .csv file full of data they can be given one instead of a .dat file. The .csv created will contain all 32 meters and all their data, not just the up to 16 meters you can log with a .dat file.

To install Winfrac 6 or 7 on a clean system, download the generic setup file (call for information) which will install all the drivers and directories and setup files needed. It should work on Windows 2000, Windows XP, Windows Vista, and Windows 7. It does not contain the WF6.exe or WF7.exe; you’ll need to download them separately.

The latest version of the English.dct can be downloaded (call for information). This English.dct file was created on February 6th, 2013. If your English.dct is older, please use this newer one. It works for both WinFrac6 and WinFrac7.

Post Plot Files

Call for information

Manuals

We have two manuals available for download:
the Winfrac manual, and the Postplot manual. Please call for information.

Hardlock Driver

Hardlock Driver Installation 32/64bit (Windows 95/98/ME/NT4/2000/XP/Vista/2003, Win 2003 Server x64, WinXP x64). Please call for information.

ATI FireMV 2400 Video Card Drivers

If you are using an ATI FireMV 2400 PCI video card you may need the following drivers:
Catalyst Software Suite for ATI FireMV 2400 PCI version 8.253.200. Please call for information.

If you are using an ATI FireMV 2400 PCIE video card you may need the following drivers:
Catalyst Software Suite for ATI FireMV 2400 PCIE version 8.593.100.8 Please call for information.

Sensoray A/D Card Windows 7 Drivers

If you are using Windows 7 you will most likely need the latest driver for the Sensoray A/D cards:
Sensoray A/D Card Windows 7 Driver.Zip Please call for information.

SmartAD.dll, SmartAd.inf, and SmartAd.sys should go into the C:/windows/system32 directory.
After downloading the files, you will need to use WinZip to uncompress any that end in .zip. Please call for information.